All4Certs Exam Archive,Microsoft Archive Pass 70-412 Exam By Practicing CertBus Latest Microsoft 70-412 VCE and PDF Braindumps

Pass 70-412 Exam By Practicing CertBus Latest Microsoft 70-412 VCE and PDF Braindumps

How to pass 70-412 exam easily with less time? CertBus provides the most valid 70-412 exam preparation material to boost your success rate in Microsoft 70-412 Configuring Advanced Windows Server 2012 Services exam. If you are one of the successful candidates with CertBus 70-412 PDF and VCEs, do not hesitate to share your reviews on our Microsoft materials.

We CertBus has our own expert team. They selected and published the latest 70-412 preparation materials from Microsoft Official Exam-Center: http://www.certgod.com/70-412.html

QUESTION NO:5

Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and childl.contoso.com. The domains contain three domain controllers.

The domain controllers are configured as shown in the following table.

You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring setting is enforced in the child1.contoso.com domain.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. Upgrade DC1 to Windows Server 2012 R2.

B. Upgrade DC11 to Windows Server 2012 R2.

C. Raise the domain functional level ofchildl.contoso.com.

D. Raise the domain functional level of contoso.com.

E. Raise the forest functional level of contoso.com.

Correct Answer: BC


QUESTION NO:26

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed.

On Dc1, you configure Windows Firewall to allow all of the necessary inbound ports for IPAM.

On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use IPAM on Server1 to manage DNS on DC1.

What should you do?

A. Modify the outbound firewall rules on Server1.

B. Modify the inbound firewall rules on Server1.

C. Add Server1 to the Remote Management Users group.

D. Add Server1 to the Event Log Readers group.

Correct Answer: D


QUESTION NO:App1y only to that question.

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1.

Cluster1 hosts a secure web Application named WebApp1. WebApp1 saves user state information locally on each node.

You need to ensure that when users connect to WebApp1, their session state is maintained.

What should you configure?

A. Affinity-None

B. Affinity-Single

C. The cluster quorum settings

D. The failover settings

E. A file server for general use

F. The Handling priority

G. The host priority

H. Live migration

I. The possible owner

J. The preferred owner

K. Quick migration

L. the Scale-Out File Server

Correct Answer: B


QUESTION NO:32

You have a server named Server1 that runs Windows Server 2012 R2. Server1 is backed up by using Windows Server Backup. The backup configuration is shown in the exhibit. (Click the Exhibit button.)

You discover that only the last copy of the backup is maintained. You need to ensure that multiple backup copies are maintained. What should you do?

A. Modify the backup destination.

B. Configure the Optimize Backup Performance settings.

C. Modify the Volume Shadow Copy Service (VSS) settings.

D. Modify the backup times.

Correct Answer: A


QUESTION NO:17

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as an enterprise certification authority (CA).

You need to ensure that all of the users in the domain are issued a certificate that can be used for the following purposes:

Email security

Client authentication

Encrypting File System (EFS)

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From a Group Policy, configure the Certificate Services Client Auto-Enrollment settings.

B. From a Group Policy, configure the Certificate Services Client Certificate Enrollment Policy settings.

C. Modify the properties of the User certificate template, and then publish the template.

D. Duplicate the User certificate template, and then publish the template.

E. From a Group Policy, configure the Automatic Certificate Request Settings settings.

Correct Answer: AD


QUESTION NO:51

Your network contains two servers that run Windows Server 2012 R2 named Server1 and Server2. Both servers have the File Server role service installed.

On Server2, you create a share named Backups.

From Windows Server Backup on Server1, you schedule a full backup to run every night. You set the

backup destination to Server2 Backups.

After several weeks, you discover that Server2Backups only contains the last backup that completed on

Server1.

You need to ensure that multiple backups of Server1 are maintained.

What should you do?

A. Modify the Volume Shadow Copy Service (VSS) settings.

B. Modify the properties of the Windows Store Service (WSService) service.

C. Change the backup destination.

D. Configure the permission of the Backups share.

Correct Answer: C


QUESTION NO:27

You have a server named SCI that runs a Server Core Installation of Windows Server 2012 R2. Shadow

copies are enabled on all volumes.

You need to delete a specific shadow copy. The solution must minimize server downtime.

Which tool should you use?

A. Shadow

B. Diskshadow

C. Wbadmin

D. Diskpart

Correct Answer: B


QUESTION NO:50

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has a single volume that is

encrypted by using BitLocker Drive Encryption (BitLocker).

BitLocker is configured to save encryption keys to a Trusted Platform Module (TPM). Server1 is configured

to perform a daily system image backup.

The motherboard on Server1 is upgraded.

After the upgrade, Windows Server 2012 R2 on Server1 fails to start. You need to start the operating

system on Server1 as soon as possible.

What should you do?

A. Start Server1 from the installation media. Run startrec.exe.

B. Move the disk to a server that has a model of the old motherboard. Start the server from the installation media. Run bcdboot.exe.

C. Move the disk to a server that has a model of the old motherboard. Start the server. Run tpm.msc.

D. Start Server1 from the installation media. Perform a system image recovery.

Correct Answer: D


QUESTION NO:39

Your network contains 20 iSCSI storage appliances that will provide storage for 50 Hyper-V hosts running

Windows Server 2012 R2.

You need to configure the storage for the Hyper-V hosts. The solution must minimize administrative effort.

What should you do first?

A. Install the iSCSI Target Server role service and configure iSCSI targets.

B. Install the iSNS Server service feature and create a Discovery Domain.

C. Start the Microsoft iSCSI Initiator Service and configure the iSCSI Initiator Properties.

D. Install the Multipath I/O (MPIO) feature and configure the MPIO Properties.

Correct Answer: B


QUESTION NO:2

Your network contains two Active Directory forests named contoso.com and adatum.com. Contoso.com contains one domain. Adatum.com contains a child domain named child.adatum.com.

Contoso.com has a one-way forest trust to adatum.com. Selective authentication is enabled on the forest trust.

Several user accounts are migrated from child.adatum.com to adatum.com. Users report that after the migration, they fail to access resources in contoso.com. The users successfully accessed the resources in contoso.com before the accounts were migrated.

You need to ensure that the migrated users can access the resources in contoso.com.

What should you do?

A. Replace the existing forest trust with an external trust.

B. Run netdom and specify the /quarantine attribute.

C. Disable SID filtering on the existing forest trust.

D. Disable selective authentication on the existing forest trust.

Correct Answer: C


CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 70-412 exam successfully with our Microsoft materials. CertBus Configuring Advanced Windows Server 2012 Services exam PDF and VCE are the latest and most accurate. We have the best Microsoft in our team to make sure CertBus Configuring Advanced Windows Server 2012 Services exam questions and answers are the most valid. CertBus exam Configuring Advanced Windows Server 2012 Services exam dumps will help you to be the Microsoft specialist, clear your 70-412 exam and get the final success.

70-412 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mMzZOU0lXNEpRakU/view?usp=sharing

70-412 Microsoft exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/70-412.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

BrandCertbusTestkingPass4sureActualtestsOthers
Price$45.99$124.99$125.99$189$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection